Home Products IP Power distribution units SC1108 / Power distribution unit

SC1108_frontpage_1

SC1108_frontpage_2

   

SC1108 / Power distribution unit

Device is used for load management and allows to switch on/off or reboot up to 8 outlets.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem and one analog sensor.

GSM modem art. SC920 is ordered separately.

Intelligent Power Management

Individual, addressable power outlets let you remotely switch power of the devices from any location in the data center or from internet

Power monitoring

Dynamically indicates on/off status for every port

Thresholds and alerts

Set limits and receive alerts and notifications to avoid unplanned downtime due to overdrawn circuits

CAN ports

Simplifies installation and management by connecting multiple extension units together to share the IP address to which they are connected

Security

IP PDU provides 3-level user authentication

Easy Installation

Simply connect to power and connect to network. Processors — we use Freescale

Technical specifications
REMOTE CONTROL
IP management Web, SNMP, manual: SMS (GSM modem art. SC920 is ordered separately!)
Devices control Administrative 3-level control of outlets using login
INTERFACE & PROTOCOL SUPPORT
Interface Access via any Internet browser.
LAN Ethernet 10/100Mbit
Network protocols DHCP, HTTP, HTTPS, SNMP, SMTP, SSL, FTP, Syslog, CAN.
OS Linux 2.6.38
RAM 64Mb
ROM 128Mb FLASH
Software Built-in software for events processing.
Alert type FTP, Syslog, SMTP or SNMP, SMS (GSM modem is ordered separately)
Pings Built-in function for ping
LEDs 4 green: ACT, CN1, CN2, ERR;
Clock Built-in clock with time synchronization
Watchdog Built-in watchdog timer
POWER
Power input IEC C20 240V * 16A. Fuse protection.
Power output 8* C13 240V
Power consumption 6W-18W
Max. load 4kW
Power reservation 12V, built-in voltage monitor, power reservation battery 9-12V connection possible.
INLETS/OUTLETS
Ethernet 100Mbit
USB port USB 2.0
Mini USB AB USB 2.0 HS
Analog port 6P4C for connection of any analog sensor.
CAN BUS 2 x 6P6C for connection of up to 8 CAN sensors on each BUS. Fuse protection on each line.
Relay outputs 8 latching relais 230V*5A
EXTERNAL MEMORY
SD card 4Gb Flash
FEATURES
Installation 19"
Dimensions (LxHxW) 440*44*85mm
Net weight 1,8 kg
Supply includes PDU, power cable 240V, C13/C14 power cable, RJ45 cord, manual CD, warranty, 4 self-adhesive rubber legs, 19" mounting angles.

SC920_thumb_front_side_m   

SC920 / GSM modem

Can be built in all monitoring master units. Needed when LAN is absent or for reservation of a connection channel of master unit with Internet; for sending SMS and voice messages.

SC450_frontpage_1

SC450_frontpage_2

   

SC450 / Airflow and temperature unit

At connection of thermal cable sensors monitors airflow and temperature. Can control up to 6 airflows at the connection of up to 6 airflow cable sensors.
System interface shows one temperature sensor and connected airflow sensors, at absence of wind or airflow displays alarm.

(Supply includes only two thermal cable sensors. Additional ones can be purchased separately.)

SC16_thumb_front_side_m

   

SC16 / Dry contacts modul

Device mounted and connected inside of any master unit can be used together with any contacts, for example with door or window contacts, circuit breakers etc.

Allows addressed correlation of dry contacts responses and permits, adequate measures to be taken established by the system logic.

Pictures & Diagrams
PICTURES
Front view download
Front side view download
Back view download
Back side view download
DIAGRAMS
General use download

 

 

 

Home | Products | Contact
© DobroSoft