Home Products CAN sensors SC460 Smoke, humidity and temperature sensor
SC460SC560_thumb

SC460 / Smoke, humidity and temperature sensor

At installation indoors, inside the rack etc., sensor monitors occurrence of smoke, temperature and humidity inside the building.
Automatic restoration of power after the actuation.

Smart multi monitoring

Addressable sensor lets you remotely monitor smoke, humidity and temperature in any location in the data center from internet

Embedded temperature sensor

Allows you to measure temperature without additional sensors

CAN ports

Simplifies installation and management by connecting to any other extension units or to master unit directly

Security

Sensor provides 3-level user authentication

Easy Installation

Simply connect sensor to any CAN output. Processors — we use NXP

Technical specifications
Smoke sensitivity 0,05 — 0,2 db/m
Response time 10 sec
Measured temperature range -20… +60°С
Accuracy 1°С
Measured humidity range 10 — 95%
Accuracy %RH 5%
Features
Customs code 8531 10 300 0
Installation On the bottom there are mounting holes for fastening smoke sensor to the surface using screws 4.8×20mm or/and bracket and M4 screws.
Connection Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-11 patch cable. Determination of sensor's type and connection occur automatically. Monitoring system allows connection of up to 40 smoke sensors into a linear circuit.
Supply includes Sensor, 3-wired shielded patch cable RJ12 (2m), bracket, 2 screws and 2 nuts M4, 2 screws 4.8×20mm, double sided sticker.
Net weight 0.2 kg
Dimensions (LHW) Ø100×45mm

IP monitoring unit

IP monitoring unit

SC2100/ Mini monitoring unit

Device is used for IP monitoring or as a video server for small premises.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem, one analog sensor and 16 dry contacts.

GSM modem art. SC920 is ordered separately.
Dry contacts unit SC16 is ordered separately.

SC2110_frontpage_1

SC2110_thumb_back_side_m

SC2110/ Monitoring unit

Device is used for IP monitoring or as a video server for small cabinets.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem, one analog sensor and 16 dry contacts.

GSM modem art. SC920 is ordered separately.
Dry contacts unit SC16 is ordered separately.

SC8100_frontpage_1

SC8100_thumb_back_side_m

SC8100/ Monitoring unit

Device is used for IP monitoring or as a video server for different premisess.
It is possible to connect up to 8 analog, 16 CAN sensors or/and additional extension units, one 1-Wire I-touch button reader and to use up to 4 relay devices, one GSM modem and 16 dry contacts.

GSM modem art. SC920 is ordered separately. Dry contacts unit SC16 is ordered separately.

SC8110_frontpage_1

SC8110_thumb_back_side_m

SC8110/ Monitoring unit with outlets

Device is used for IP monitoring or as a video server in server rooms or data centres.
It is possible to connect up to 8 analog, 16 CAN sensors or/and additional extension units, one 1-Wire I-touch button reader and to use up to 4 relay devices, one GSM modem and 16 dry contacts, 4 loads 230V.

GSM modem art. SC920 is ordered separately. Dry contacts unit SC16 is ordered separately.

SC1108_frontpage_1

SC1108_frontpage_2

   

SC1108 / Power distribution unit

Device is used for load management and allows to switch on/off or reboot up to 8 outlets.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem and one analog sensor.

GSM modem art. SC920 is ordered separately.

Pictures & Diagrams
PICTURES
Front side view download
DIAGRAMS
General use download

Home | Products | Contact
© DobroSoft