SC420 Converter 4-20mA

Home

Products

Analog sensors

Products

SC420 / Converter 4-20mA

Converter of current loop 4-20mA is used for measurement of constant current on 4-20mA outputs of sensors and converting data into format of IP monitoring system. The system interface allows you to assign the sensor and to introduce the function data conversion.

Galvanic isolation of 3 kV between I/O is used in a receiver.

Overview
Specifications
Used with
Pictures
Docs
Soft & drivers

Smart multi monitoring

Addressable sensor lets you remotely monitor water leakage in any location in the data center from internet

Security

System provides 3-level user authentication

Easy Installation

Simply connect sensor to any unit analog input.

Technical specifications
Measured current	4-20mA
Accuracy	2%
Galvanic isolation	3 sec
Features
Customs code	9030 33 300 9
Installation	On the bottom there is a ledge with Ø 4.5 mm and height 1 mm; and a mounting hole in 50 mm from it for fastening sensor by screw 4.8×16mm.
Connection	Connector RJ12 is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. The green terminal is connected to a standard 4-20mA output of any 4-20mA sensor output.
Supply includes	Sensor, cable RJ11 2m, 4.8×16mm screw, 2-pin terminal strip type TBW-5-2p, double sided sticker.
Net weight	50g
Dimensions (LHW)	60×18×18mm

SC2100/ Mini monitoring unit

Device is used for IP monitoring or as a video server for small premises.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem, one analog sensor and 16 dry contacts.

GSM modem art. SC920 is ordered separately.
Dry contacts unit SC16 is ordered separately.

SC2110/ Monitoring unit

Device is used for IP monitoring or as a video server for small cabinets.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem, one analog sensor and 16 dry contacts.

GSM modem art. SC920 is ordered separately.
Dry contacts unit SC16 is ordered separately.

SC8100/ Monitoring unit

Device is used for IP monitoring or as a video server for different premisess.
It is possible to connect up to 8 analog, 16 CAN sensors or/and additional extension units, one 1-Wire I-touch button reader and to use up to 4 relay devices, one GSM modem and 16 dry contacts.

GSM modem art. SC920 is ordered separately. Dry contacts unit SC16 is ordered separately.

SC8110/ Monitoring unit with outlets

Device is used for IP monitoring or as a video server in server rooms or data centres.
It is possible to connect up to 8 analog, 16 CAN sensors or/and additional extension units, one 1-Wire I-touch button reader and to use up to 4 relay devices, one GSM modem and 16 dry contacts, 4 loads 230V.

GSM modem art. SC920 is ordered separately. Dry contacts unit SC16 is ordered separately.

SC1108 / Power distribution unit

Device is used for load management and allows to switch on/off or reboot up to 8 outlets.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem and one analog sensor.

GSM modem art. SC920 is ordered separately.

Pictures & Diagrams
PICTURES
Front side view	download
DIAGRAMS
General use	download

< Prev