Home Products Accessories SC257 CPU module
SC257_thumb_front_side_m

SC257 CPU module

Used in all master units.
It`s necessary in a loss or in case of failure to use the CPU module.

CPU

CPU module is required for the any system.

Security

Provides 3-level identification.

Easy Installation

Simply install module inside of any master unit.

Technical specifications
SO DIMM 200 pins
Latches On the motherboard
Features
Custom code 8471 50 000
Socket The processor board is mounted in the DIMM slot on the motherboard.
Installation Turn off power, remove the latches and remove the idle processor module, insert new in the same position, press firmly to latch carefully.
Supply Unit
Weight 50 g
Dimensions (L×H×W) 68×3×26 mm

IP monitoring unit

IP monitoring unit

SC2100/ Mini monitoring unit

Device is used for IP monitoring or as a video server for small premises.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem, one analog sensor and 16 dry contacts.

GSM modem art. SC920 is ordered separately.
Dry contacts unit SC16 is ordered separately.

SC2110_frontpage_1

SC2110_thumb_back_side_m

SC2110/ Monitoring unit

Device is used for IP monitoring or as a video server for small cabinets.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem, one analog sensor and 16 dry contacts.

GSM modem art. SC920 is ordered separately.
Dry contacts unit SC16 is ordered separately.

SC8100_frontpage_1

SC8100_thumb_back_side_m

SC8100/ Monitoring unit

Device is used for IP monitoring or as a video server for different premisess.
It is possible to connect up to 8 analog, 16 CAN sensors or/and additional extension units, one 1-Wire I-touch button reader and to use up to 4 relay devices, one GSM modem and 16 dry contacts.

GSM modem art. SC920 is ordered separately. Dry contacts unit SC16 is ordered separately.

SC8110_frontpage_1

SC8110_thumb_back_side_m

SC8110/ Monitoring unit with outlets

Device is used for IP monitoring or as a video server in server rooms or data centres.
It is possible to connect up to 8 analog, 16 CAN sensors or/and additional extension units, one 1-Wire I-touch button reader and to use up to 4 relay devices, one GSM modem and 16 dry contacts, 4 loads 230V.

GSM modem art. SC920 is ordered separately. Dry contacts unit SC16 is ordered separately.

SC1108_frontpage_1

SC1108_frontpage_2

   

SC1108 / Power distribution unit

Device is used for load management and allows to switch on/off or reboot up to 8 outlets.
It is possible to connect up to 16 CAN sensors or/and additional extension units, GSM modem and one analog sensor.

GSM modem art. SC920 is ordered separately.

Pictures & Diagrams
PICTURES
Front view download
DIAGRAMS
General use download

Home | Products | Contact
© DobroSoft